Three systems, three problems they solve.
Not every home needs every system. We test your water on the visit and recommend only what'll actually make a difference.
For: hard water minerals
Removes calcium and magnesium. Stops scale. Doubles the life of water heaters, dishwashers, and washing machines.
For: chlorine, sediment, taste
Carbon-based filtration on the main line. Removes chlorine, chloramines, sediment, and most taste/odor issues at every fixture in the house.
For: clean drinking water
Reverse osmosis at the kitchen sink. Removes lead, fluoride, nitrates, PFAS, and total dissolved solids.
For: most DFW homes
Softener + carbon filter on the main line, plus RO at the kitchen. The right setup for most DFW homes.
What's actually in DFW tap water?
Dallas Water Utilities' published reports show our tap water is safe by federal standards — but "safe" and "good" aren't the same thing. We routinely measure:
- Total hardness: 7–10 grains per gallon (moderate to hard) — leaves scale on every fixture
- Chlorine/chloramine: 2.5–4 mg/L (legal, but you can taste it) — kills carbon filters faster than chlorine alone
- Total dissolved solids (TDS): 250–400 ppm — affects taste; bottled water is typically <50
- Lead: Mostly safe at the source, but pre-1986 homes can have lead solder in interior plumbing — RO at the tap is cheap insurance
Sizing the system right matters more than the brand.
An undersized softener will burn through resin in 4 years instead of 12. An oversized one wastes salt and water on every regen. We size based on:
- Number of people in the home (water use per day)
- Measured grains of hardness at your address
- Peak flow demand — multiple bathrooms running simultaneously
- Salt-handling capacity — how often you want to refill the brine tank
For most 4-person DFW households, that's a 48,000-grain unit with 1" plumbing. For larger families or estate homes, 64,000+ with 1.25".